Description
Custom UV DTF Sticker:
weather-resistant, scratch-resistant, and waterproof.
We do not recommend using in microwaves or dishwashers.
Custom UV DTF Sticker:
weather-resistant, scratch-resistant, and waterproof.
We do not recommend using in microwaves or dishwashers.
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 3.5 × 3.5 × 13.5 in |
| Size | 11.5" x 12", 11.5" x 24", 11.5" x 36", 11.5" x 48" |
Price range: $15.00 through $48.00
One business day turnaround (Read more)
UV Sticker Gang Sheet.
Please contact for large orders at: order@decotransfer.ca
We will proceed with printing your order exactly as submitted. Please ensure your file is correct before uploading. If this is your first time ordering, please visit our FAQ and Art Specification pages for more information or contact us at: order@decotransfer.ca
If we need to contact you because the design sizes don’t match the order, or the quality doesn’t meet the minimum requirements for DTF, your order will be processed on the next business day (please expect a one-day delay).
1. Clean the surface: Start by cleaning the surface where you want to apply the transfer. Use a lint free cloth and rubbing alcohol to remove any dirt, oil, etc that may be present. By doing so, this will allow the transfer to adhere properly. Allow the item to air dry before applying.
2. Peel away the backing: Gently peel the backing paper off the transfer. Be careful not to touch the adhesive side of the printed transfer.
3. Carefully position the transfer: Position the transfer on the prepared surface. Apply the transfer slowly from one side to another, smoothing out any bubbles that form as you go. Use your fingers or a straight edge card (like a credit card). For larger transfers (mug wraps), it is better to start from the center and move to the left and right.
4. Apply pressure: Once the transfer has been placed onto the surface use your finger to apply pressure throughout the design. For larger prints, use a squeegee. This step will help ensure a bond between the transfer and surface.
5. Remove clear transfer tape: Gently peel the clear transfer tape away from the surface. Work slowly from one side to ensure you don’t pull up the transfer from the surface. If the transfer does pull up, just push it back down and rub decal to the surface with firm pressure before trying to remove it again.